Anderson Natural Aspirated 4" Power Pipe® for 86-93 Mustang 5.0/5.8, Using Abaco DBX97, Pro-M 77/80/92 shorty, 95mm Velocity meters, or virtualy any MAF with a 4" housing.
***This Power Pipe® is for use with standard throttle bodies ranging from stock to 75mm, non-race versions***
NOW All Polished Aluminum Construction!!!
Flows 1147 cfm at 20,4" of water. Tested on our Super Flow 1200 flow bench
Mandrel bent 4"" pipe that puts the mass air and air cleaner in the fenderwell for a cooler intake charge for added H.P.
Does not include Mass Air Meter or Air Cleaner. Works with Abaco DBX-97, 77-83mm Pro-M or 95mm Velocity meters.
Will work with Maximum Motorsports strut tower brace
Testimonial: Kelly from Texas says - "Great power gains for the money. My 93 GT picked up 3 tenths of a sec and 3 MPH in the 1/8th mile. The motor really woke up from 3000 to 6500 rpm..."
Download Instructions Here
AF-0112A Power Pipe Installed on 94-95 Mustang 5.0 with inner fender opening. Modified to 86-93 placement and using 86-93 throttle body
Run.008 Stock rubber intake hose with 80mm Pro-M Mass Air
Run.015 only change is AF-0112C Power Pipe with same 80mm Pro-M Mass Air
Posted by Unknown on 18th Jul 2016
The air tube is nice and light... It's not like those steel ones that everyone else is manufacturing. This new 'aluminium" tube should help keep the air cooler on its way to the throttle-body.
Posted by Coop on 12th Feb 2015
This is a very nice intake tube. Finish and fit is top notch and definitely will flow some air at 4" diameter.
All prices are in USD