![]()
![]()
![]()
PO Box 638, 1001 State RT10 West, Clinton, IL 61727
NEW 5.0/5.8 ANDERSON PRODUCTS
These products are intended for off-road use only.
NEW Paxton SL Supercharger Kit
From The Pioneer Of The First Centrifugal Supercharger With An Internal Oil Reservoir
Paxton Automotive announces the new line of NOVI "SL" Superchargers. A technically advanced centrifugal unit that does not require a connection between the engine oil pan and the compressor gear case... No oil lines! You'll also experience a shorter installation time.
* This technically advanced unit takes the internal oil reservoir concept, pioneered by Paxton in the 50s, and blends this feature with today's technology providing an alternative to engine oil lubricated-type superchargers
* The NOVI SL will not need to be removed from the engine for oil change service. The service interval, after initial change at 2500 miles, is at least every 7500 miles using Paxton's proprietary synthetic lubricant
* Helical gear design with 3.6:1 step-up ratio
* Includes remote fluid drain hose (attached to supercharger) that allows for simple fluid changes without removing the supercharger from the vehicle
* Ventilated gear case assembly. Eliminates any potential internal pressure issues that are currently associated with non-vented competitive designs
* Integrated gear case baffling for proper oil control
* Simple oil slinger design does not require separate shaft or bearing set. Provides proper fluid delivery to gears and bearings
* Supercharger requires 4 oz of special synthetic fluid. With complete supercharger kits, three 4 oz. bottles are included for future fluid changes
* Integrated dipstick for simple fluid checks* The systems to utilize the new SL Supercharger are also a great price
1001831SL 86-93 5.0 Mustang S/C system
w/NOVI 1220SL 6lb of boost .$2264.19
NEW PMAS 75mm Mass Air Meters
![]()
NEW Fuel Starter Kit
(Used on 88 coupe in the Pump-Gas Brags article in June issue of 5.0 Mustang)
NEW Flow Dynamics 1-5/8 Shorty Headers
p/n FD-0158ss
Flow Dynamics 1 5/8 Polished Stainless Steel Shorty Headers
For 85-93 Mustang
Great quality Great price
$245.00
p/n FD-0158c
Flow Dynamics 1 5/8 ceramic mild steel shorty headers
For 85-93 Mustang
Great quality Great price
$245.00
p/n FD-0158
Flow Dynamics 1 5/8 Nickel plated mild steel shorty headers
For 85-93 Mustang
Great quality Great price
$145.00
p/n FD-0158ss shown
NEW Quick Time Bell Housing
NEW Quick Time Bell Housing
'79-'95 Mustangs
$422.00
p/n RM-6065
This bell housing is what everyone has been asking for.
Small design gives more room for headers.
Fits TKO, 3550 & T5 transmissions
Light weight at only 22 pounds.
SFI 6.1
NEW ANDERSON
Filter Kit
For 89-01 GT & LX with separate ACTsensor.
Kit includes Load IO and PowerBell w/Powerstack air filter.
For use with 90mm Lightning Mass Air
p/n PKLOADIFK
$325.00
NEW ANDERSON
Mass Air Kit
Flows 1385cfm
F or 89-01 GT & LX with separate ACT sensor.
Kit includes Load IO, 90mm mass air, and PowerBell w/Powerstack air filter
p/n PKLOADIOMAK
$395.00
NEW ANDERSON BIG PUMP
External Fuel Pump
Anderson Ford Motorsport has developed the new Big Pump external fuel pump kits.
With a 255 lph fuel pump in the stock Mustang fuel tank and using stock diameter and length Mustang fuel lines, the Big Pump has been tested to supply up to 61 gallons per hour at 60psi to the fuel rails.
This is enough fuel volume to handle up to 50 lb/hr injectors.
Kits are provided with fuel line adapters, wire harness, relay, and mounting brackets.p/n AF-6286 for 86-93 Mustangs
p/n AF-6294 for 94-98 Mustangs$288.00
AF-6294 shown
NEW ANDERSON HI-REV CNC
TWISTED WEDGE HEADS
Anderson is pleased to announce our new Hi-Rev CNC Ported TFS Twisted Wedge heads.
Not wanting to work with the standard Trick Flow port design, we started with a special casting from Trick Flow that allowed us to make our own port design.
These heads are fully CNC machined, resulting in the highest velocity, highest flowing, most consistent port we could achieve. We then mill to achieve a 62cc combustion chamber and insure good gasket seal. We finish up with a competition multi-angle valve job and assemble with all Hi-Rev valve train components.
p/n AF-TWCNC320
$2299.00
NEW ANDERSON/VORTECH MONDO BOX UPPER INTAKE
We have tested a lot of upper box intakes utilizing the TFS-R lower. The Mondo Box has impressed us the most
and is the most tuneable of all the upper box intakes we have tested on forced induction or natural aspirated combinations.
Mondo Box V-8M101-012.........................................................................................................$566.50
Mondo Box V-8M101-012 and TFS-R Lower 5.0 TFS-515L0003.................Kit price $834.00
Mondo Box V-8M101-012 and TFS-R Lower 5.8 TFS-515L0004.................Kit price $911.00With the design of the Mondo Box you have room to change runner length by adding or subtracting 3/8, 1/2 or 1 inch spacers. This allows you to adjust peak horsepower and still fit under most 86-93 three inch cowl hoods.