Pro-M Mass Air Flow Meter 92mm 80lb Injectors. Fits 89-93 5.0L Mustang

Pro-M 92mm Mass Air Flow Meter for 80lb injectors for 89-93 5.0 Mustang

The Pro-M 92 is the undisputed "Bad-Ass" of mass air meters. It out flows larger diameter meters by a long shot, due to its bell mouth design, and because the sampling element does not protrude into the opening.

The patented 360 sampling design of the Pro-M 92 makes this meter the finest in the industry. No other meter provides a signal as clean as the Pro-M 92. It is, by far, the most accurate meter on the market. Don't settle for the copy produced by the other guys!

If it does not have 360 degree sampling, and the element hanging into the air path means it does not flow as much as the Pro-M 92 (despite the copy's larger size!)

The Pro-M 92 is a universal high flow design available in any calibration you choose. It is capable of supporting over 1500 flywheel HP. A high flow conical air filter (Pro-M 92MM Filter) is included. Every Pro-M mass air meter plugs into your vehicle's harness connector without modification

Important Note* ProM Mass Air Meters are made and calibrated at the time of order. Each one is made to spec based on your vehicle. These are NOT returnable and NOT refundable if created and shipped. Please double check you are getting the correct meter! If you need a recalibration or something changed on your MAF you will need to contact ProM directly and pay whatever fees necessary for your changes.