AFM Terminator X Fox Body Base Tune (86-93 Mustang)

Anderson base tune file for AFM-Holley Terminator X equipped Fox Body Mustangs.

(Please read all the details below)

Base tunes are for pump gas 91 or 93 octane only

Fee is $80 per tune file

After purchase fill out your tune order form link below:

Link:   AFM TUNE ORDER FORM

The Holley Terminator X system is an excellent standalone ECU upgrade to control your Fox Body Mustang. Most of the fine tuning can be done on your own or in a controlled environment with a dyno. However, like any new system the startup and base calibration may not be suitable for your vehicle. It may hardly run or run very poorly. There are actually a few things the owner must do in the software versus the included handheld. We here at Anderson Ford Motorsport have tuned and reviewed many of the common issues with this system and have come up with some excellent base calibrations to help you get back on the road in no time.

Here is what you are getting with an Anderson Base Tune file for the Fox Body Terminator X ECU: Appropriate Sensors for your specific application, fresh timing map more closely related to your combination (conservative for boosted applications), a better target air/fuel map, adjusted startup settings, and correct pin map settings for Ford.

*We highly recommend some basic - midlevel computer knowledge or contact a remote tuning service to assist if you are uncomfortable navigating through the software.

Please read and understand the following:

PLEASE READ YOUR TUNE FILE EMAIL IN ITS ENTIRETY!!!! This email will contain basic instructions on setting up.

There will still be a few steps that the end user MUST do before driving on the included tune. You will still need to verify your timing under static timing. You will also still need to do a TPS autoset (usually prompted when powering on the ECU and loading the tune file) You will want to confirm the IAC percentage once vehicle is warmed up and adjust the throttle blade if necessary (perform TPS autoset if you change or adjust throttle blade)

REMEMBER!!!!! This is a base tune file only and can be adjusted by the end user or tuner. We do NOT send revisions nor do we provide e-mail tuning assistance or remote tuning assistance at this time. This should be performed in person at a performance shop, dyno facility or remote tuning service.

The tune files sent are created using V2 or V3 Terminator X software. Please confirm which firmware on the ECU you are using (in the form). V2 users will need to have build 80 firmware updated in the system. - As of early 2024 Holley has been sending out ECU's that have V3 build 110 already on them. You can confirm this on the box of your ecu. 

Software Downloads

* Price is per tune file

* Base files are for using 91 or 93 Octane fuel only! (For specialties fuels or E85 contact a dyno tuning facility for proper tuning)

* Tune file will be based on using AFM Fox Body Kits using TFI style distributor and SBF engines (we are not tuning with other ignition types)

* Tune files are based around 1986-1993 Fox Body Mustangs

* File will be setup for Ford Idle Air Control Motor (PWM)

* Sensors will be set to Holley (Unless Gen. 2 AFM kit is used) and if using Forced Induction MAP will be set to Holley 3 BAR.

* We will only use fuel injectors that have available injector data. (Can view in the tune form)

* The form must be filled out as accurately as possible, AFM will not redo the file if incorrect info was sent from the user.

* Files are completed in 1-2 business days

* No refunds on tune files, no exceptions

For remote tuning or revision sessions we recommend Pinetop Tuning as an option. You can visit HERE for more information.

 Liability Disclaimer:

By purchasing this tune file the end user has read and understands the following: The end user is responsible to complete vehicle tuning. AFM is not responsible for any damage or issues with the vehicle. It is highly recommended to have a professional performance shop complete tuning in a controlled dyno environment. We only provide base tunes using premium 91 or 93 octane fuels. For specialty fuels like race gas or E85 it is highly recommended to contact a Performance Dyno Tuning Facility. Failure to do so may result in possible engine damage or poor performance. AFM is not liable for any issues the end user may experience after tuning there own vehicle or using the purchased base calibration on there vehicle. The provided tune file from AFM is meant to provide a solid/better baseline and not a final tune for the end users vehicle. Tuning through the Holley Terminator X is meant for off-road and track use only! Holley tuning is not emissions compliant and does not have an EO CARB # and is for OFF ROAD use only. The end user is responsible to follow all laws and regulations in there area.