Anderson N41 Cam Kit 87-95 5.0L Aluminum Heads

For 87-95 5.0L

An all in one kit that gives you the power of the famous Anderson N41 cam plus the recommended springs, retainers and locks at one low price! (For aftermarket aluminum cylinder heads)

Parts list:

AF-N41

AF-HR-15018

AF-BSR730

AF-BVL610

N-41 Camshaft works with stock OEM pistons with 1.6 roller rockers.  RPM range 2600-6200.

302 c.i.d. This cam is to be used with 1.6 R.R. Best cam for GT-40. Great with TFS or Edelbrock heads. Minimum 24lb injectors and 75mm mass air. Recommend 3.73 to 4.30 gears. Good drivability down to 2100 rpm, lumpy idle, rpm range 2600-6200, works best with 89-93 EEC, needs 2800-3000 converter.

Spring specs: 1.47" diameter, 1.800" install height, Inside diameter .700"
Seat pressure 150lb @ 1.800", open pressure 450lb @ 1.200"   MAX LIFT .600"
Springs are dual with damper

Spring retainers are 10-degree, steel

Valve locks are 10-degree, steel, for 11/32" valve stems

Note*

Springs and retainers do not work on OE iron cylinder heads

Cam cannot be switched out for different cam option