Anderson N41 Cam Kit 87-95 5.0L
- Calculated at Checkout
For 87-95 5.0L
An all in one kit that gives you the power of the famous Anderson N41 cam plus the recommended springs, retainers and locks at one low price!
N-41 Camshaft works with stock OEM pistons with 1.6 roller rockers. RPM range 2600-6200.
302 c.i.d. This cam is to be used with 1.6 R.R. Best cam for GT-40. Great with TFS or Edelbrock heads. Minimum 24lb injectors and 75mm mass air. Recommend 3.73 to 4.30 gears. Good drivability down to 2100 rpm, lumpy idle, rpm range 2600-6200, works best with 89-93 EEC, needs 2800-3000 converter.
Spring specs: 1.47" diameter, 1.800" install height, Inside diameter .700"
Seat pressure 150lb @ 1.800", open pressure 450lb @ 1.200" MAX LIFT .600"
Springs are dual with damper
Spring retainers are 10-degree, steel
Valve locks are 10-degree, steel, for 11/32" valve stems
Springs and retainers do not work on OE iron cylinder heads
Cam cannot be switched out for different cam option