Holley Terminator X High Impedence Fuel Injector Kit E-85 Compatible

Write a Review
SKU:
KITHLYE85INJ
Shipping:
Calculated at Checkout
$470.95
Frequently bought together:

Description

If you are running the Holley Terminator X or Terminator X Max ECU kit and looking for a budget friendly high impendence injector set to use E-85 then this kit is for you! This kit is designed to work with all 1986-2004 Mustang GT/Cobra using the EV1 Fuel Injection Harness from the Terminator X. These injectors were meant to work with pump gas, E85, race fuel and high horsepower applications.

Terminator X High Impedance Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp o-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. (441 cc/m to 2310 cc/m) you are sure to find an injector that matches your non-emissions controlled application. These high quality fuel injectors can also be used with any ECU that utilize high impedance fuel injector drivers.

Three options to choose from (select above)

100 lb/hr : Rated injector flow: 100 lb./hr. at 60 PSI of base fuel pressure

120 lb/hr : Rated injector flow: 120 lb./hr. at 60 PSI of base fuel pressure

220 lb/hr : Rated injector flow 220 lb./hr. at 43 PSI of base fuel pressure

Kit comes with the following:

8 Holley Terminator X Fuel Injectors

8 EV1 harness to EV6/USCAR Injector Adapters

8 Fuel Injector Height Adapters w/orings

 

Note* Injector data available in the Holley V2 software firmware update 70, otherwise can download Holley's injector data directly from the website and enter manually into the Holley Terminator X software under custom injector data.

Note* Due to the popularity of some components in these kits there may be lead or back order time, please call to confirm availability.

View AllClose