INTAKES | POWER PIPES ® | CAMS | EXHAUST | HEADS | SUPERCHARGERS | GEARS

ANDERSON 4.6/5.4 Power Pipes®

 

20 hp gain
THIS IS WITH NO FLASHING OF COMPUTER

Anderson AF-0123c Power Pipe with Velocity mass air meter is made to work with Ford
factory programming in your computer.


No need to reprogram your stock computer to work with
a non calibrated intake pipe.

 


05-06 Mustang Power Pipe®
for FRPP 90mm MAF Kit
or Stock Rubber Inlet

Anderson Ford Motorsport has recently released the latest addition to the Power Pipe® line up. Power Pipe® #AF-0122C is specifically engineered for use with FRPP 90mm cold air kit or any cold air kit that utilizes the stock rubber inlet pipe.

On our 05 Mustang with FRPP Drag Pack kit, our new Power Pipe® produced and additional 6.5 RWHP over the factory rubber inlet.

Simply install the Power Pipe® - NO ADDITIONAL TUNING needed.

 



05-06 Mustang Power Pipe®
for Pro Charger Applications
Stock Hood


 

Cowl Hood

 

 


 

96-04 Mustang Power Pipe®
for ProCharger D-1sc and P-1sc SC's
AF-0114C

(P-1sc Procharger with 3.70 pulley. Went from 10lb of Boost to 12.5lb of Boost with Power Pipe.)

 


 

00-02 Lightning Power Pipe®
AF-0107C

 

 


 

96-01 Normally Aspirated Power Pipe®
AF-0118C
for 77-83mm Pro-M Shorties Mass Air

 

 


 

Power Pipe® for the 96-98
Normally Aspirated Cobra Mustang
AF-0117C

It is a mandrel bent 4 " pipe that puts the mass air and air cleaner in the fenderwall for a cooler intake charge for added H.P.


Works best with 80mm PRO-M shorty.

Comes with air pump relocation kit so the mass air can go into the fenderwell.

Does not include mass air or air cleaner

 

 


 

New Power Pipe® for the 99-00
Normally Aspirated Cobra Mustang
AF-0116C

It is a mandrel bent 4 " pipe that puts the mass air and air cleaner in the fenderwall for a cooler intake charge for added H.P.


Works best with 80mm PRO-M shorty.