LOAD Tuner Instructions
PO BOX 638 RT 10 WEST CLINTON, IL 61753
Phone 217-935-2076 Fax 217-935-4611 Rick 217-935-2384
www.andersonfordmotorsport.com
LOADTuner
INSTRUCTIONS
Thank you for purchasing an Anderson product
1. Find a good mounting spot for the LOADTuner we recommend on Mustangs under the dash or in the glove box.
2. Find or make a small hole in firewall and run the wire through and up to the mass air.
3. On the mass air sensor it says A B C D. Take the wires coming from the LOADTuner and hook up as follows
Black: Splice into C wire
Red: Splice into A wire
Yellow: Cut D wire. hook up to wire going to MAS air
Orange: Hook up to D wire going back to ECU
You are ready to start tuning.
If you have any questions call 1-217-935-2384.