Rear End

 UPR Fully Adjustable Billet Steel Axle Braces for your 1979-2004 Ford Mustang with 8.8" rear end. Designed to tie the axle tubes and center section together to strengthen your stock 8.8" rear end.Designed to bolt on to the center section and...

Ford Racing Friction Modifier for Clutch-Type Limited-Slip Differentials (May substitute Motorcraft #XL-3)

Fits 8.8" axle Fits 1986-2004 Mustang GT Low profile design also fits 2005-2014 Mustang GT and 2007-2014 Shelby GT500 Mustang except 2013-2014 Track Pack option Light-weight 356T6 aluminum casting replaces rear cover on 8.8" Load bolts...

8.8" differential Fits 31-spline axles Fits solid or independent rear suspension Carbon fiber clutch plates for increased durability Will acccept anti-lock exciter ring, Requires 4-ounces of CM-19546-A1 friction modifier with initial...

Ford Racing 3.55 8.8" Ring & Pinion No one does 8.8" gears better than Ford Racing€¦.stonger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing...

Ford Racing 3.73 8.8 Ring & Pinion No one does 8.8" gears better than Ford Racing€¦.stonger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing...

Ford Racing 4.10 8.8" Ring & Pinion No one does 8.8" gears better than Ford Racing€¦.stonger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing...

Ford Racing 4.56 8.8" Ring & Pinion No one does 8.8" gears better than Ford Racing€¦.stonger and quieter. The 8.8" rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing...

Ford Racing 8.8 Ring & Pinion Installation kitKit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts and cover gasket Use for changing ring and pinion gear or differential

Ford Racing 8.8" Ring & Pinion Installation Kit Fits all 8.8" axles 1986-2013 including IRS except 2013 Boss and GT500 Excellent upgrade for all 8.8" rear ends. High-torque bearing adds durability for modified vehicles Contains all components...

Fits all 1986-2004 8.8" axle assemblies except IRS differential Contains all components from M-4210-B2 plus 8.8" axle bearing and seal kit M-1225-B Kit includes: 2012 Shelby GT500 high-torque pinion bearing Pinion and carrier shims Crush...

7/16"-20 x .875" bolts Set of 10 bolts Can also be used for automatic transmission flywheels

Ford Racing Rebuild Kit for 8.8 Traction-LokKit includes clutch pack, shims, and friction modifier Fits all 8.8" Traction-Lok differentials

Fits all 8.8" Traction-Lok differentials Carbon fiber discs designed for higher torque usage Used in 2003-04 Cobra and Mustang GT500  Kit includes: Carbon fiber clutch pack Shims 31 spline S-spring, 28 spline...

Ring & Pinion By MOTIVE Gear, 3.90 Ratio

Motive Gear 4.30 8.8" Ring & Pinion

Royal Purple 75W90 Max-Gear is an ultra-tough automotive gear oil. It's designed to maximize power and provide unsurpassed protection to heavily loaded gears.It makes gears run smoother, quieter, cooler and longer without overhauls.Max-Gear outperforms...

Strange Lightweight Pro Race spool.  31-spline application. Ford 8.8"Requires C-clip eliminator kit or replacement housingends. (8.80 lbs.)Strange Lightweight Spools- Strange spools are used in a wide variety of race cars to replace heavier and weaker...

Strange Lightweight Pro Race spool.  33-spline application.  Ford 8.8".  Requires c-clip eliminator kit or replacement housingends. (8.80 lbs.)Strange Lightweight Spools- Strange spools are used in a wide variety of race cars to replace heavier and...

*Strange Safety Hubs (C-Clip Eliminator) with caliper mounts for 94-04 factory 8.8"Ford Mustang housing ends equipped with stock disc brakes (except for Cobra) and axles Features Timken roller bearings (kit)- Street and Strip*When using SE-A1096 with an...