Camshafts & Valvetrains

Anderson Cam Chain Retention ToolWith all of the cam testing we have done over the years on the 4.6 two valves, Anderson Ford Motorsport has developed a time-saving tool.This tool is used to remove the camshafts in the 4.6 two valve engines that are...

Anderson F-42 Two valve Camshaft for PI Heads & OEM stock pistons RPM range 2400-6200 Forced Induction  8-13 lb. 4.6 Best performer up to 6200 rpm. Nice idle, good driveability down to 1800 rpm,performance range 2400-6200 rpm. Recommend AFM...

Anderson F-52 Two valve Camshaft for PI Heads with AFM Valve Springs & Aftermarket pistons/ valve reliefsRPM range 2500-6200Forced Induction 8-13 lb. 4.6 Best performer up to 6200 rpm. Nice idle, good driveability down to 1900 rpm, performance...

Anderson F-82 Two valve Camshafts for PI Heads with AFM Valve Springs & aftermarket pistons/valve reliefsRPM range 2800-7200 Forced Induction 13lb. plus 4.6 Best performer up to 7200 rpm shift point. Rough idle, good driveability down to 2400 rpm,...

Anderson Hi-Rev Valve Springs for 2V P.I. heads. Must have for Anderson Hi-Rev camshaft. Replace part 221427 Maximum Valve Lift (in.): 0.580 in. Outside Diameter of Outer Spring (in.): 1.125 in. Coil Bind Height (in.): 1.080 in. Spring...

If you are running any AFM 4.6 2V performance camshaft set you'll need to upgrade your camshaft sprocket bolts to these high quality bolts from ARP. End your camshaft timing worries! High-quality ARP cam bolts have increased preload clamping force to...

Ford OEM Cam Chains for 96-04 Mustang4.6 2VIncludes(2) 5W7Z-6268-AA

Ford OEM Intake & Exhaust cam gears with spacers for 96-04 4.6 2VIncludes(1) F8AZ-6256-BA(1) F8AZ-6256-AA(2) F3AZ-6265-A Availability lead time currently: 2-3 business days

Ford OEM Lash Adjuster for 96-04 4.6 2V

Ford OEM Lower Crank Gear for 96-04 4.6 2V

Anderson N-22 Two valve Camshaft for PI Heads & OEM stock pistonsRPM range 2400-62004.6 Best performance up to 6200 rpm. Nice idle, good driveability down to 1800 rpm, performance range 2400-6200 rpm. Recommend AFM valve spring kit but stock...

Anderson N-32 Two valve Camshafts for PI Heads with AFM Valve SpringsRPM range 2700-6600. Good with Typhoon & Track Heat intakes4.6 Best performance up to 6600 rpm shift point. Lumpy idle, good driveability down to 2100, performance range 2700-6600...

Anderson N-52 Two valve Camshafts for PI Heads with AFM Valve Springs & aftermarket pistons/valve reliefsRpm range 3500-7200. Best with Typhoon & Track Heat intakes 4.6 Best performance up to 7200 rpm shift point. Very lumpy idle, good...

Royal Purple Max Tuff assembly lube recommended for maximum start-up protection for new camshaft installationGet Your's Today