Throttle Bodies

If you’re thinking of building either a high performance or race multi-point fuel injection system for your engine, look no further than Holley for the throttle body. Holley offers a line of universal throttle bodies that range in sizes from 1000...

If your vehicle already has an electric fuel pump with a return line in place, you might not need to replace it.* If this situation fits your car, consider the Throttle Body Kit which comes with the Throttle Body, Power Module (with Wide Band O2 sensor),...

This Edelbrock intake elbow is an ultra high flow (up to 1050 cfm) adapter elbow for throttle body placement on an Edelbrock Super Victor EFI intake manifold.  Will accept up to a 95 mm Ford 86-93 style throttle body.

It’s economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. The Sniper EFI master kit...

It’s economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. The Sniper EFI master kit...

If you want to have the ability to plug and play the Idle Air Control and Throttle Position Sensors with the Holley HP or Dominator EFI then this kit is for you. Accufab has created a setup that has made it easy to finish out your Holley EFI kit on your...

Accufab 75mm Cable Bracket Spacer 3/8" thickCable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

Accufab 75mm Throttle Body & EGR Spacer Kit for 86-93 Mustang 5.0Accufab Standard version throttle body has a vacuum elbow and the exact mm size is measured  at the blade.  The OD of the inlet is approximately the same mm specifiedThe...

Accufab 80mm Cable Bracket Spacer 3/8" ThickCable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

Accufab 90mm Cable Bracket Spacer 3/8" thickCable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

Accufab 75mm Race Polished Throttle Body & 2" Spacer Kit 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 75mm through 90mm have a 4"...

Accufab 75mm Race Polished Throttle Body 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the ball Race versions sized 65mm through 90mm have a 4" inlet or opening.  An Anderson Power...

Accufab 80mm Race Polished Throttle Body & 2" Spacer Kit 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 75mm through 90mm have a 4"...

Accufab 90mm Race Polished Throttle Body 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 65mm through 90mm have a 4" inlet or opening. An...

Accufab 75mm throttle body was designed to be used on the 1986-1993 Ford 5.0L Mustang. A Standard version throttle body has a vacuum elbow and the exact mm size is measured  at the blade.  The OD of the inlet is approximately the same mm...

Accufab 90mm Throttle Body Gasket

Accufab's 75mm throttle body kit including full size blank spacer for EGR delete.  Fits 1986 - 1993 Mustang 5.0.  

Mishimoto has developed an oil catch can to make sure you’re getting the most out of your performance parts.Over time harmful oil will build up inside the turbocharger, intake manifold, intercooler and piping. A Mishimoto Oil Catch Can will prevent...