Air System

Intake Manifold, Super Victor EFI, Aluminum, Multi-Port, Fits 9.5 in. Deck Height Only, Ford, 351W Edelbrock part #29245 Super Victor 351W EFI intake manifold is designed for high rpm or large displacement competition 351 Windsor Ford V8's with a deck...

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang Black (Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs...

The EFI Hi-Ram manifold line has a new addition for the 8.2" SBF Ford application. The runner length and tapered cross section design will perform well for a wide range of engine combinations. The engineering team also redesigned the water crossover...

Anderson MAF Delete and Filter kit. When deleting your MAF from your intake system or Power Pipe® it allows more space for a larger filter. This kit provides both a 10 inch long filter and a MAF delete pipe that can attach right back into your...

Anderson MAF Delete and Filter kit. When deleting your MAF from your intake system or Power Pipe® it allows more space for a larger filter. This kit provides both a 10 inch long filter and a MAF delete pipe that can attach right back into your...

Anderson MAF delete pipe. Perfect if you want to keep your power pipe and filter without having change couplers/clamps, fits right where your MAF housing would go. If you are upgrading your ECU system to Holley EFI, Terminator X, Microsquirt,...

Anderson MAF delete pipe. Perfect if you want to keep your power pipe and filter without having change couplers/clamps, fits right where your MAF housing would go. If you are upgrading your ECU system to Holley EFI, Terminator X, Microsquirt,...

UPPER PLENUM ONLY HI-RAM 95MM Fabricated Side Mount Plenum Top for EFI Hi-Ram Manifolds Holley now has fabricated aluminum plenum to options for those of us with limited room in the front of our engine bays. The 4 mm thick aluminum side mount plenum...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a 93 Cobra style or GT40 series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a Holley Systemax intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier which...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a Trick Flow R series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with an Edelbrock RPM II series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier...