Throttle Bodies

BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a...

BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a...

BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a...

This Edelbrock intake elbow is an ultra high flow (up to 1050 cfm) adapter elbow for throttle body placement on an Edelbrock Super Victor EFI intake manifold.  Will accept up to a 95 mm Ford 86-93 style throttle body.

These aluminum adapters allow the use of a '86-'93 style intake manifold on 1994-95 5.0L Mustangs. Available in Natural Aluminum finish or Black Powdercoat (select above) 75mm opening

Accufab 75mm Cable Bracket Spacer 3/8" thickCable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

Accufab 75mm Throttle Body & EGR Spacer Kit for 86-93 Mustang 5.0Accufab Standard version throttle body has a vacuum elbow and the exact mm size is measured  at the blade.  The OD of the inlet is approximately the same mm specifiedThe...

Accufab 80mm Cable Bracket Spacer 3/8" Thick Cable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

Accufab 90mm Cable Bracket Spacer 3/8" thick Cable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

AccuFab Dual 60mm Throttle Body for 99-01 Cobra Mustang and 03-04 Mach 1This Accufab throttle body easily bolts on to the stock, unmodified intake manifold and will increase total airflow with no unacceptable side effects, such as whistling or negative...

Accufab Ellipse Throttle Body for 96-98 Cobra and 02 Bullitt Mustang.Accufab ELLIPTICAL single blade which flows 1284 cfm compared to the stock twin blade design which flows 1089 cfm.  Dyno tests on a stock vehicle show a 5 to 7 hp gain.  ...

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It’s the perfect starting point for future modifications. Exceptional Quality: Accufab’s quality is second to none! This throttle body...

This Mustang 4.6L 2V 1996-2004 Throttle Body & Plenum upgrade will improve your Mustangs throttle response and horsepower. It’s the perfect starting point for future modifications. Furthermore, independent dyno tests on a completely stock...

Accufab Oval Throttle Body Only for 03-04 Cobra MustangThe throttle body is top quality billet aluminum and precision CNC machined to our engineering specifications.  It is only available with a high polished finish.The throttle body ONLY includes a...

Accufab Oval Throttle Body for99-04 Lightning truck   The following throttle body was designed to be used on the 1999-2004 Lightning and Harley trucks.  It's primary purpose is to increase horsepower while maintaining an easy to install, direct...

Accufab 75mm Race Polished Throttle Body & 2" Spacer Kit 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 75mm through 90mm have a 4"...

Accufab 75mm Race Polished Throttle Body 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the ball Race versions sized 65mm through 90mm have a 4" inlet or opening.  An Anderson Power...

Accufab 80mm Race Polished Throttle Body & 2" Spacer Kit 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 75mm through 90mm have a 4"...

Accufab 90mm Race Polished Throttle Body 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 65mm through 90mm have a 4" inlet or opening. An...

Accufab offers this high performance 70mm throttle body and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking. CNC 6061-T6 Billet...