Power Adder

Synthetic lubricant for V-3 superchargers. This special fluid is required for proper maintenance of the V-3 supercharger. Use of any other fluid will void the warranty and may cause component failure. Fluid Level Checking ProcedureEnsure that the .06"...

The NOS Big Shot plate system has been used with great success by many of the nation’s premier 5.0 racers. The nitrous plate installs between the upper and lower manifold sections. The dose of fuel and nitrous delivered to the intake tract is...

The engineers at NOS have hit a bullseye by designing the finest entry-level nitrous system available today with the NOS Sniper kit. The Sniper is the economical “entry-level” kit from NOS that simply blows away competitive kits. The Sniper...

NOS have built on the very popular, budget friendly, Sniper nitrous kits for those who need a little more power from their engines. The new Sniper 250 kits step up the power potential to an additional 250 horsepower, in a low cost single nitrous plate...

The Snow Performance Stage 1 Boost Cooler® water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged). Operation is simple and reliable: the system starts injecting when the boost switch reaches the...

Unlock 50-80HP on your boosted vehicle while decreasing your air temps by up to 150 degrees! The all new Snow Performance Stage 2 Boost Cooler® water-methanol injection system comes fully revamped in 2015 for all boosted (turbocharged/supercharged)...

Features: The 6 BTM is ideal for engines with a turbo or supercharger. Not only will the engine benefit from MSD's full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation.When your turbo or blower...

Features: OPERATING SPECIFICATIONS Spark Energy: 135 mJ per spark Primary Voltage: 535 Volts Secondary Voltage: 45,000 Volts Spark Series Duration: 20 degree Crankshaft Rotation RPM Range: 12,500 RPM with 14.4 Volts Voltage Required: 12-18...

The Vortech Maxflow® Race Bypass Valve flows 320 CFM@8 PSIG and features a compact design that is ideal for sport compacts and other applications with tight engine compartments. These units will retrofit to standard HKS/Greddy style mounting pads and...

AEM 35 PSI Boost Dependent Water/Methanol Injection Controller and Wiring HarnessAEM’s Boost Dependent water/methanol injection controller is ideal for vehicles running up to 35 PSI of boost. It has an on-board manifold absolute pressure (MAP)...

BACK BY POPULAR DEMAND!!! The AFM MR. FREEZE is simplistic, yet effective.  Being activated by boost and metered by jetting, MR. FREEZE is easily optimized.  Mr. Freeze is an easy bolt-on for all centrifugal superchargers and turbochargers...

This is the best electric pump-based water / methanol system we've found to date! The AIS Pro Meth Stage 1 adjustable boost activated trunk mount water / methanol system.  Best of all, it's completely upgradeable, allowing you to upgrade to the...