Power Packages

This kit is designed for maximum results in a 1987 - 1995 5.0 Mustang using a stock short block and stock 6200 rpm rev limiter. 1994 - 1995 models will require an intake manifold adapter. Recommend rear gear ratio is 3.73.  Automatic...

This kit is designed for maximum results in a 1987 - 1995 5.0 Mustang using a stock short block and stock 6200 rpm rev limiter. 1994 - 1995 models will require an intake manifold adapter. Recommend rear gear ratio is 4.10, but, will work with 3.73 as...

This kit is designed for maximum results in a 1987 - 1995 5.0 Mustang using a stock short block and stock 6200 rpm rev limiter.  650 cfm carb recommended. Recommend rear gear ratio is 4.10, but, will work with 3.73 as well.  Automatic...

This budget friendly kit is designed for maximum results in a 1987 - 1995 5.0 Mustang using a stock short block and stock 6200 rpm rev limiter. Recommend rear gear ratio is 4.10, but, will work with 3.73 as well.  Automatic transmission equipped...

This kit is designed for a good bump in power but still an easy to drive combo on the street. Works well with low and mild boost combos up to 15psi. Suited for a 1987 - 1995 5.0 Mustang using a stock short block and stock 6200 rpm rev limiter. Recommend...

The ultimate top end kit is here! From intake down to the mass air meter this kit will have you covered! We here at Anderson Ford have done years of testing to confirm which parts work best in tandem to give you the best performance for your hard earned...

  Anderson / Vortech Stage II V-3 Si-Trim Kit Supercharger Tuner Kit for 94-95 Mustang 5.0 (self lubcricated)Includes: • 3.12 Upper Pulley, 6.87 Lower Pulley (12lb-15lb @ 6000 rpm) • AFM Power Pipe ®All mandrel bent mild-steel ceramic...

Anderson / Vortech Stage III V-3 Si-Trim Kit Supercharger Kit for 94-95 Mustang 5.0 (self lubcricated)Includes: • 3.12 Upper Pulley, 6.87 Lower Pulley (12lb-15lb @ 6000 rpm) • AFM Power Pipe ®All mandrel bent mild steel ceramic coated...