Supercharger Accessories

Synthetic lubricant for V-3 superchargers. This special fluid is required for proper maintenance of the V-3 supercharger. Use of any other fluid will void the warranty and may cause component failure. Fluid Level Checking ProcedureEnsure that the .06"...

The Snow Performance Stage 1 Boost Cooler® water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged). Operation is simple and reliable: the system starts injecting when the boost switch reaches the...

Unlock 50-80HP on your boosted vehicle while decreasing your air temps by up to 150 degrees! The all new Snow Performance Stage 2 Boost Cooler® water-methanol injection system comes fully revamped in 2015 for all boosted (turbocharged/supercharged)...

6-Rib, 3.48" Vortech Supercharger Pulley

This Vortech supercharger discharge tube is designed to connect the supercharger head unit to the OEM style throttle body. They are manufactured from high-quality aluminum.

Features: The 6 BTM is ideal for engines with a turbo or supercharger. Not only will the engine benefit from MSD's full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation.When your turbo or blower...

Features: OPERATING SPECIFICATIONS Spark Energy: 135 mJ per spark Primary Voltage: 535 Volts Secondary Voltage: 45,000 Volts Spark Series Duration: 20 degree Crankshaft Rotation RPM Range: 12,500 RPM with 14.4 Volts Voltage Required: 12-18...

The Vortech Maxflow® Race Bypass Valve flows 320 CFM@8 PSIG and features a compact design that is ideal for sport compacts and other applications with tight engine compartments. These units will retrofit to standard HKS/Greddy style mounting pads and...

AEM 35 PSI Boost Dependent Water/Methanol Injection Controller and Wiring HarnessAEM’s Boost Dependent water/methanol injection controller is ideal for vehicles running up to 35 PSI of boost. It has an on-board manifold absolute pressure (MAP)...

AFCO Pro-Series double pass heat exchanger and dual fans for '07-'14 Mustang GT500. This unit is 26 1/4" W x 9" T. It is an easy bolt-on installation and includes all necessary hardware and includes hoses and an installation manual.  The AFCO Racing...

BACK BY POPULAR DEMAND!!! The AFM MR. FREEZE is simplistic, yet effective.  Being activated by boost and metered by jetting, MR. FREEZE is easily optimized.  Mr. Freeze is an easy bolt-on for all centrifugal superchargers and turbochargers...

This is the best electric pump-based water / methanol system we've found to date! The AIS Pro Meth Stage 1 adjustable boost activated trunk mount water / methanol system.  Best of all, it's completely upgradeable, allowing you to upgrade to the...

Stage 2 kit. If you are running the standard Vortech/Paxton bracket and inlet tube on your supercharged 5.0L Mustang then this kit is for you! Eliminate belt slip and add approx. 1-2 lbs of boost without changing a supercharger pulley! If you want to...

Anderson Power By Pass kit for Passanger side mounted Vortech SI,TI,YS,YSI Trim on 86-93 Mustang 5.0(Vortech Mondo Bypass Valve Not Included)Flows 1235 cfm at 20,4" of water. Tested on our Super Flow 1200 flow benchANDERSON FORD MOTORSPORT designed the...

Anderson Power Pipe® for Procharger F-1, P-Series, D-1SC with A/C on 86-93 Mustang 5.0The Anderson Power Pipe®, with its all 4" mandrel bent Ceramic coated inside and out construction, is the highest flowing inlet pipe available for centrifugal...

Anderson Power Pipe® for Procharger F-1, P-Series, D-1SC without A/C on 86-93 Mustang 5.0The Anderson Power Pipe®, with its  all 4" mandrel bent Ceramic coated inside and out construction, is the highest flowing inlet pipe available for...

Vortech,S,T,YSI Trims, Paxton Novi 2000, Powerdyne Superchargers on 86-93 Mustang 5.0  (Please Specify Supercharger Model When Ordering)The Anderson Power Pipe®, with its all Aluminum mandrel bent construction, is the highest flowing inlet...

Anderson Ford Motorsport now has what every Vortech owner has always wanted.An easier way to adjust your Supercharger belt. ( For 8 rib pulley )This billet adjuster mounts easily to your Supercharger and allows you to loosen the tensioner bolts and...

We've partnered with VMP Performance to offer a package for 2007-2012 Shelby GT500's to get you an additional 100 hp. Also this can all be done at your own garage without a dyno and completed in an afternoon. 07-09 GT500's can expect between 110-130 hp...

Dayco 8-Rib,  53 7/8" Belt