Drivetrain

Protect yourself and your car with UPR Products 3 piece front Drive Shaft Safety Loop for your 2011-2016 Ford Mustang 5.0. Required on cars using DRs or Slicks or any car going 13.99 or faster. 3 Piece bolt in installation makes it quick and easy.2" wide...

Hays Performance Drivetrain is proud to now offer Hydraulic Pedal Height Adjuster Kits. These black anodized pedal height adjusters plumb inline between your factory or aftermarket master cylinder and release bearing. By adjusting the screw on the top of...

The Street 450 single disc kit is an excellent upgrade from your stock clutch and designed handle mildly modified engines up to 450 horsepower. It is a great clutch where drivability is the most important factor. Our clutch features 30% greater clamping...

DSS Halfshafts are a great upgrade in strength over the stock axle shafts. Best for supercharged applications or heavy use such as drag racing. The Driveshaft Shop direct replacement axle shafts are specifically designed for use on the 2015+ S550...

Fits 2015 - 2017 Mustang GT, V6, I4 and GT-350 Direct replacement for production half shaft assemblies Severe duty serviceable CV joints with CNC billet centers CNC-machined from aerospace high-alloy materials Billet one-piece 34-spline inner and...

◾Fits 2015-2017 Mustang GT, V6 and I4 with 3.31, 3.55, 3.73, and 4.09 ratio gears only◾Traction-Lok 8.8-inch differential ◾Fits 34-spline axles  ◾Requires 4-ounces of CM-19546-A1 friction modifier with initial fill◾For use with M-4209-88355A,...

Fits 2015-2017 Mustang Super 8.8-inch IRS center section◾Includes OEM crush sleeve and pinion nut  ◾Requires M-4210-B3 Mustang 8.8-inch ring-gear and pinion install kit ◾Made in United States in Ford's Sterling Axle Plant◾OEM Quality - our superior...

◾Fits 2015-2017 Mustang Super 8.8-inch IRS center section ◾Includes OEM crush sleeve and pinion nut ◾Requires M-4210-B3 Mustang 8.8-inch ring-gear and pinion install kit  ◾Compatible with Ford Performance 2015-17 Mustang Power Pack Calibrations that...

Fits all Super 8.8" IRS axles in 2015-2017 Mustang◾Note: does not fit earlier 1986-2014 8.8” axles◾Bill of material:◾OEM pinion bearings and races◾OEM Differential bearings and races ◾Pinion and Differential Shims◾Crush sleeve◾Pinion nut◾Pinion...

Fits all 8.8" Traction-Lok differentials Carbon fiber discs designed for higher torque usage Used in 2003-04 Cobra and Mustang GT500  Kit includes: Carbon fiber clutch pack Shims 31 spline S-spring, 28 spline...

Approximately 19% reduction in throw Increased driver feel and feedback Kit includes all necessary hardware and instructions to install in 2015-2017 Mustang with manual transmission (GT, 2.3L, 3.7L) Comes with exclusive Ford Racing 6-speed...

Fits stock 2015-2017 Mustang shifter and M-7210-M8 Ford Racing Short Throw Shifter      6-speed black shift knob with “Ford Performance” logo  Retains stock M12 x 1.25 thread for shift knob

SPEC Stage 3 Clutch Kit for all 2011, 2012, 2013, 2014, 2015, 2016 and 2017 GT Mustangs Built After March 2011 and all 2012-2013 Boss 302 Mustangs. As you upgrade the engine in your Mustang, it is imperative that the other components also get upgraded...

SPEC Stage 2-Plus Clutch Kit for all 2011, 2012, 2013, 2014, 2015, 2016 and 2017 GT Mustangs Built After March 2011 and all 2012-2013 Boss 302 Mustangs. As you upgrade the engine in your Mustang, it is imperative that the other components also get...

Manual Transmission - mount insert bushing Low compliance synthetic elastomer heavy duty manaul transmission mounts increase positive shift feel through reduction in compliance of the mounting bushings.