Intake Manifolds

The Edelbrock 3835 adapter kit is required to install the Performer 5.0 PN 3821 or Performer RPM PN 7126 in 1994 and 1995 Mustangs. The 1994-1995 throttle body has a different bolt flange and idle air motor than 1987-1993 models. It is also swung out...

These aluminum adapters allow the use of a '86-'93 style intake manifold on 1994-95 5.0L Mustangs. Available in Natural Aluminum finish or Black Powdercoat (select above)

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang(Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs in the...

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang Black (Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs...

The EFI Hi-Ram manifold line has a new addition for the 8.2" SBF Ford application. The runner length and tapered cross section design will perform well for a wide range of engine combinations. The engineering team also redesigned the water crossover...

Fel-Pro Performance Intake Gasket composite,Printoseal, 2.10 in. x 1.28 in. Port, .060 in. Thick, Ford, 260/289/302/351W, Set

Fel-Pro Performance Gaskets,Intake,Composite, 2.25 in. x 1.40 in. Port, .090 in. Thick, Ford, 260/289/302/351W, Set

UPPER PLENUM ONLY HI-RAM 95MM Fabricated Side Mount Plenum Top for EFI Hi-Ram Manifolds Holley now has fabricated aluminum plenum to options for those of us with limited room in the front of our engine bays. The 4 mm thick aluminum side mount plenum...

They say black is the new chrome. If so, Holley just added the right amount of shine! Holley is proud tointroduce several of our popular Holley and Weiand intake manifolds in our all new Carbon Black CeramicCoating! The coating provides an aggressive yet...

(Requires adapter for use with 94-95 throttle bodies) Holley says:This Ford EFI passenger car manifold was developed by Holley for its SysteMax II Ford performance package. Don't be fooled by its California emission-legal designation. This manifold will...

Mishimoto has developed an oil catch can to make sure you’re getting the most out of your performance parts.Over time harmful oil will build up inside the turbocharger, intake manifold, intercooler and piping. A Mishimoto Oil Catch Can will prevent...

Black Powdercoat with 90mm Throttle Body Opening Trick Flow’s® R-Series EFI Intake Manifolds are computer-engineered to deliver ideal airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower. The...

Silver Powdercoat with 90mm Throttle Body Opening Trick Flow’s® R-Series EFI Intake Manifolds are computer-engineered to deliver ideal airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower. The...

Black Powdercoat with 75mm Throttle Body Opening Trick Flow’s® R-Series EFI Intake Manifolds are computer-engineered to deliver ideal airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower. The...

Silver Powdercoat with 75mm Throttle Body Opening Trick Flow’s® R-Series EFI Intake Manifolds are computer-engineered to deliver ideal airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower. The...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a 93 Cobra style or GT40 series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a Holley Systemax intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier which...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a Trick Flow R series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with an Edelbrock RPM II series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier...