Fuel System Components / Injectors

Holley HP Billet Fuel Pressure Regulator, Inline, 40-70 psi Pressure Range, -8 AN O-ring Female Threads Inlet/Outlet. These Holley HP billet fuel pressure regulators are designed to help keep your fuel pressure set at the proper psi. They are...

Holley Dominator Billet Fuel Pressure Regulator, Billet Aluminum, Black/Clear Anodized, 40-70 psi., -10 AN Female Inlet/Outlet.These Holley Dominator billet fuel pressure regulators are designed for use with Holley's Dominator inline fuel pumps or other...

Adjustable billet fuel pressure regulators designed to handle the demands of the Ford 4.6L, 5.0L and 5.4L engines. Installs easily on the stock factory fuel rail.Adjustable from 30-70 PSI. Fuel pressure rises on a 1:1 ratio when referencing boost. 1/8”...

The A1000 Bypass Regulator was designed for use with our A1000 Fuel Pump or similar style EFI pumps in a carbureted application. This regulator is perfect for naturally aspirated or ‘blow-through’ supercharged engines. Base fuel pressure...

Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation.Fits 1986-1995 5.0L Ford Mustang GT & Cobra – Rails Only ORB-08 Ports with compact connections and positive, leak-free...

ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. Higher than stock flow rates may require reprogramming. These injectors also utilize a new...

32LB/HR EV1 Injectors. Perfect for high performance Naturally Aspirated builds. ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power, improved throttle response & better fuel economy...

  17130 - 86-98.5 A1000 5.0L Mustang Stealth Fuel SystemSKU: 17130 In 2003 Ford developed a specific tank for the 03 and 04 Mustang Cobras. This tank looked like a normal tank from the outside, but featured one of the finest internal baffling...

Originally developed for the 2010 Ford Cobra Jet Mustangs, these 6 gallon aluminum fuel cells feature the same advantages of the 15 and 20 gallon versions, but without the street-style sending unit. Plus, the compact 6 gallon size, makes it perfect for...

Originally developed for the 2010 Ford Cobra Jet Mustangs, these 6 gallon aluminum fuel cells feature the same advantages of the 15 and 20 gallon versions, but without the street-style sending unit. Plus, the compact 6 gallon size, makes it perfect for...

AF-2989 Braided Stainless Steel Hose Cutting Shears Material: Steel Description: This tool is designed to make clean straight cuts on braided stainless steel hoses. Can also be used on rubber or other braided hoses. This is the best tool you can get...

These Mr. Gasket double ended AN wrenches make it easy to assemble hose ends & maintain your race car or HP vehicle. The contoured edge is comfortable in your hand & the short length helps to prevent over-tightening the hose ends. Each wrench is...

CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock Super Victor EFI manifolds, they come with all necessary hardware. (Not for use with...

Fits 86-95 5.0L and 5.8L  These Trick Flow® TFX™ fuel rails are perfect when building a custom fuel system. The fuel rails are threaded for -8 AN fuel fittings. They also feature a black anodized finish that resists corrosion, and...

Holley EFI 220 lb/hr Fuel Injectors feature a precision lapped disc valve, high-quality brass windings, and high-temp O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other...

Bosch/EV1 style performance injectors - Set of 8 High impedance (12.2 Ohms) for use with saturated drivers Rated injector flow: 36 lb/hr @ 43 PSI Supports up to 575 horsepower Tri-cone spray pattern

Holley EFI Fuel Injector Set 42 lbs fuel injectors, 8-per set

Holley Sniper EFI Self-Tuning kit + handheld EFI monitor- Shiny Finish Base Kit (no pump, filters, fittings, or fuel line) Holley just brought EFI within range! Introducing Sniper EFI! It’s economically priced so you can have all the benefits of...

It’s economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. The Sniper EFI master kit...

Aeromotive Street Rail System '86-'95 Ford 5.0With this complete, 5.0 Street Rail System, you replace the OE fuel rails and regulator with the Aeromotive High Flow Fuel Rails and remote-mount, boost reference, adjustable regulator. The system connects...