Intake Manifolds

- Basic operating RPM range: 3500-8000- Intake manifold height: 5.5”- Natural finish- Made from aluminumThis Victor Jr. Intake Manifold features a low profile single-plane design, a cast aluminum construction with a natural finish. This manifold...

Intake Manifold, Super Victor EFI, Aluminum, Multi-Port, Fits 9.5 in. Deck Height Only, Ford, 351W Edelbrock part #29245 Super Victor 351W EFI intake manifold is designed for high rpm or large displacement competition 351 Windsor Ford V8's with a deck...

The Edelbrock Super Victor EFI intake manifold is designed for high-rpm and competition 289 / 302 engines with aftermarket Windsor-style performance cylinder heads.  This intake manifold is excellent for larger displacement drag racing engines and...

This cast EFI intake elbow allows the use of Ford throttle bodies on any intake manifold w/ the 4150 mounting flange. Slotted mounting holes & dual throttle cable mounting bracket bosses allow the elbow & throttle body to be mounted forward,...

This Edelbrock intake elbow is an ultra high flow (up to 1050 cfm) adapter elbow for throttle body placement on an Edelbrock Super Victor EFI intake manifold.  Will accept up to a 95 mm Ford 86-93 style throttle body.

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang(Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs in the...

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang Black (Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs...

Edelbrock's Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley...

Stealth™ Intake Manifold 221, 260, 289, 302 V8 Features: Port Size: 1.83” height 1.02" width Height: Front 4.35", Rear 5.59" High Rise Dual Plane Design Square Carburetor Mounting Flange No EGR provisions Power band: Idle-6000...

Fel-Pro Performance Intake Gasket composite,Printoseal, 2.10 in. x 1.28 in. Port, .060 in. Thick, Ford, 260/289/302/351W, Set

Fel-Pro Performance Gaskets,Intake,Composite, 2.25 in. x 1.40 in. Port, .090 in. Thick, Ford, 260/289/302/351W, Set

They say black is the new chrome. If so, Holley just added the right amount of shine! Holley is proud tointroduce several of our popular Holley and Weiand intake manifolds in our all new Carbon Black CeramicCoating! The coating provides an aggressive yet...

(Requires adapter for use with 94-95 throttle bodies) Holley says:This Ford EFI passenger car manifold was developed by Holley for its SysteMax II Ford performance package. Don't be fooled by its California emission-legal designation. This manifold will...

FITMENT: 1986-1993 Ford Mustang 5.0LJ&L 3.0 Oil Separator 3oz CapacitySolid billet construction.Limited Lifetime Warranty How does it work? During the process of venting crankcase pressure back through your intake track, large amounts of oil, in...

One Available from long back order, no ETA on remaining inventory on order Silver Powdercoat with 75mm Throttle Body Opening Trick Flow’s® R-Series EFI Intake Manifolds are computer-engineered to deliver ideal airflow distribution and...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a 93 Cobra style or GT40 series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a Holley Systemax intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier which...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a Trick Flow R series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with an Edelbrock RPM II series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier...