Intake Manifolds

- Basic operating RPM range: 3500-8000- Intake manifold height: 5.5”- Natural finish- Made from aluminumThis Victor Jr. Intake Manifold features a low profile single-plane design, a cast aluminum construction with a natural finish. This manifold...

The Edelbrock Super Victor EFI intake manifold is designed for high-rpm and competition 289 / 302 engines with aftermarket Windsor-style performance cylinder heads.  This intake manifold is excellent for larger displacement drag racing engines and...

The EFI Hi-Ram manifold line has a new addition for the 351W Ford application. The new manifold is available to work with a 105MM LS throttle body. The runner length and tapered cross section design will perform well for a wide range of engine...

The Edelbrock 3835 adapter kit is required to install the Performer 5.0 PN 3821 or Performer RPM PN 7126 in 1994 and 1995 Mustangs. The 1994-1995 throttle body has a different bolt flange and idle air motor than 1987-1993 models. It is also swung out...

This Edelbrock intake elbow is an ultra high flow (up to 1050 cfm) adapter elbow for throttle body placement on an Edelbrock Super Victor EFI intake manifold.  Will accept up to a 95 mm Ford 86-93 style throttle body.

These aluminum adapters allow the use of a '86-'93 style intake manifold on 1994-95 5.0L Mustangs. Available in Natural Aluminum finish or Black Powdercoat (select above)

Add some ponies to your 4.6L 2V Mustang with a Trick Flow® StreetBurner® EFI Intake Manifold. They are designed for mildly modified engines and will improve performance from 2,500 to 7,000 RPM. Symmetrical, high-velocity intake ports and throttle...

Add some ponies to your 4.6L 2V Mustang with a Trick Flow® StreetBurner® EFI Intake Manifold. They are designed for mildly modified engines and will improve performance from 2,500 to 7,000 RPM. Symmetrical, high-velocity intake ports and throttle...

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang(Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs in the...

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang Black (Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs...

Edelbrock's Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley...

Stealth™ Intake Manifold 221, 260, 289, 302 V8 Features: Port Size: 1.83” height 1.02" width Height: Front 4.35", Rear 5.59" High Rise Dual Plane Design Square Carburetor Mounting Flange No EGR provisions Power band: Idle-6000...

Features: 3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes Twin 65mm bore Throttle Body Opening for maximum airflow 100% TIG welded EFI Intakes include 3/8" Fuel rail kits (Sniper logo laser...

Anderson 2018+ Intake Manifold Swap Kit for 2011-2014 Mustang GT Complete kit to correctly install the popular 2018 Mustang GT intake manifold on your gen 1 Coyote Mustang. The 2018 Mustang GT intake manifold is an excellent naturally aspirated...

11-17 Mustang GT for 2018+ Intake Manifold swaps deleting the CMCV/IMRC assemblies. A must for have when swapping 11-14 Mustang GT with 18+ Intake Manifolds. Can be used with 15-17 Mustang GT if deleting the CMCV/IMRC assemblies as well. Easy...

Fits 2011-2014 Mustang GT 5.0L 4V Ti-VCT engine Original equipment on Mustang Boss 302, 302S and 302R Race Cars Made from light-weight composite material Short runners for optimum flow at high rpm's. Includes unique Ford...

Fel-Pro Performance Intake Gasket composite,Printoseal, 2.10 in. x 1.28 in. Port, .060 in. Thick, Ford, 260/289/302/351W, Set

Fel-Pro Performance Gaskets,Intake,Composite, 2.25 in. x 1.40 in. Port, .090 in. Thick, Ford, 260/289/302/351W, Set

OEM Ford 2018+ Mustang GT Intake Manifold Assembly. (Photo is representation, current part number may be completely black in finish) An excellent performance upgrade for 11-17 Mustang GT's. Gaskets are preinstalled. Has CMCV/IMRC assemblies installed...

They say black is the new chrome. If so, Holley just added the right amount of shine! Holley is proud tointroduce several of our popular Holley and Weiand intake manifolds in our all new Carbon Black CeramicCoating! The coating provides an aggressive yet...