86-93 Mustang GT/LX/Cobra

Choose Options

Quick view

Anderson 6500 RPM "R" Series Forced Induction Top End Kit for 1987 - 1995 5.0 Mustang

Multi-Manufacturer Kits

MSRP: $4,836.22

$4,799.00

Was:

This kit is designed for supercharged/turbocharged race style setups in a 1987 - 1995 5.0 Mustang using a stock short block and 6500 rpm rev limiter. 1994 - 1995 models will require an intake manifold adapter. This top end kit utilizes our HR series cam...

KIT8795FI65TI

MSRP: $4,836.22

$4,799.00

Was:

Choose Options Quick view
Choose Options

Quick view

Anderson 6500 RPM "R" Series Natural Aspirated Top End Kit for 1987 - 1995 5.0 Mustang

Multi-Manufacturer Kits

MSRP: $4,836.22

$4,799.00

Was:

This kit is designed for race style setups in a 1987 - 1995 5.0 Mustang using a stock short block and 6500 rpm rev limiter. 1994 - 1995 models will require an intake manifold adapter. This top end kit utilizes our HR series cam paired with R series...

KIT8795NA65TI

MSRP: $4,836.22

$4,799.00

Was:

Choose Options Quick view
Quick view

Anderson Ultimate 6200 RPM Natural Aspirated Top End Kit for 1987 - 1993 5.0 Mustang

Multi-Manufacturer Kits

MSRP: $5,487.07

$5,225.00

Was:

Cylinder heads are on back order from TFS. Orders will be allowed again once they are available. The ultimate top end kit is here! From intake down to the mass air meter this kit will have you covered! We here at Anderson Ford have done years of...

KIT8793NA62FC

MSRP: $5,487.07

$5,225.00

Was:

Quick view
Choose Options

Quick view

Anderson-Vortech Si-Trim Self-Lubricated Supercharger Tuner Kit with a FREE Power Pipe. Fits 86-93 Mustang

Anderson Ford Motorsport

MSRP: $4,889.98

$4,392.94

Was:

Anderson / Vortech Si-Trim Supercharger Tuner Kit For 86-93 Mustang Kit Includes: Vortech V-3 Si-Trim self-lubricated supercharger, mounting bracket assembly with hardware, 8-rib pulley set with 6.87"/3.12" and 3.60", aluminum discharge assembly...

KITAFMTUNERSI93

MSRP: $4,889.98

$4,392.94

Was:

Choose Options Quick view

Built for Your Lifestyle

No matter what type of driving experience you want, Anderson Ford Motorsport is here to turn your concept into reality. If you have an idea how to modify your Stang, but you don’t know how and where to start, ask our team of performance racing experts. We would love to share our knowledge, time, experience, and expertise with you.

If you want to upgrade your ride in your own garage, choose among our 1986-1993 Mustang GT/LX/Cobra performance parts and kits for sale. If you have no idea how to carry out modifications, let our experienced technicians complete the job for you. Drive straight to our service center, choose the right components with the help of our team, and we’ll do the rest. Before you know it, your muscle car will be more stylish and powerful than ever.

It's hard to believe, but back in the mid-80s, Ford almost replaced the Mustang with a front wheel drive coupe. Although the "Fox Body" was a major improvement over the tepid Mustang II, performance was still lacking in the face of higher gas prices and emissions requirements. A massive letter campaign convinced Ford to give the Mustang another shot. The replacement became the Probe, while the Fox body received a long list of improvements to bring performance in line with what their customers expected from the original pony car. Sales went up 60%, saving the Mustang from cancellation.

The Mustang got a styling revision in '87, but a lot of its new performance features were added in '86. As the turbocharged SVO was phased out, buyers were left with two choices: a 2.3 liter Lima four cylinder or the newly revised "5.0" 302 c.i. V8. The V8 could be ordered in any trim level, but even if the car came with the four cylinder, engine swaps are straight forward since it shares its K-member with the V8.

This power is backed up by an 8.8 rear end in the V8s and either "World Class" Tremec T5 manual with a low 3.35:1 ratio first gear or Ford's AOD four speed automatic.

Improvements were made throughout the model run. In 1988 California models and 1989 nationwide models, the V8's speed controlled fuel injection system was replaced with mass air flow system, making the car easier to modify. In 1992, the forged pistons were replaced with high tolerance hypereutectic pistons. Improvements to the T5 increased its rated limit of 265 lb-ft. of torque to 300 lb-ft. in 1990.

Ford launched the SVT division with the Cobra in 1993. Power was improved by adding cast iron performance heads, a free flowing intake and exhaust, a revised camshaft and an underdrive pulley, while rear disc brakes compensated for the extra speed. This brought output up to 235 hp, 35 more than the standard 5.0. Although performance improved, SVT saw their first Mustang as a touring car more than a race car, fitting it with a softer, better riding suspension than the GT.

Even as Ford improved the stock Mustang, owners have always been looking for ways to improve performance. When we opened Anderson Ford in 1988, we saw a market for performance upgrades. We opened Anderson Motorsports the following year to both provide parts for our customer’s Fox bodies and support our own racing. We've worked on these cars since the beginning, helping customers to tune their machines and even develop some of our own products.

Browse through our great selection of performance parts for 86-93 Mustang GT,LX, and Cobra today. Call 888-715-6487 or complete our online form for inquiries.

86-93 Mustang GT/LX/Cobra

Anderson 6500 RPM "R" Series Forced Induction Top End Kit for 1987 - 1995 5.0 Mustang

Anderson 6500 RPM "R" Series Natural Aspirated Top End Kit for 1987 - 1995 5.0 Mustang

Anderson Ultimate 6200 RPM Natural Aspirated Top End Kit for 1987 - 1993 5.0 Mustang

Anderson-Vortech Si-Trim Self-Lubricated Supercharger Tuner Kit with a FREE Power Pipe. Fits 86-93 Mustang

Built for Your Lifestyle