Misc

Moroso's breather tanks are great for low vacuum venting. This tank is 3 1/8" diameter, 6 1/2" tall without the breather filter. Each breather tank features a 2 in. breather filter mounted on top and an aluminum bottom drain fitting and ball valve. ...

Replacement for carbureted Ford distributors with 0.468" ID and MSD Distributors, PN's 8582, 8579, 8479, 8352 and 8503. A distributor's performance is only as good as its drive gear. MSD Performance has put a great deal of effort into researching and...

A simple bolt on solution to your AFM Valve Covers needing to vent crankcase pressure to a catch can. If you have gone from a naturally aspirated setup to a forced induciton setup and need to add fittings to go to a catch can then this pair of vent...

Anderson screw-on breather for stock Mustang 5.0 valve covers (No Logo) Fits: 1979 Mustang,1980 Mustang, 1981 Mustang, 1982 Mustang, 1983 Mustang, 1984 Mustang, 1985 Mustang, 1986 Mustang, 1987 Mustang, 1988 Mustang, 1989 Mustang, 1990 Mustang, 1991...

Anderson Steel Lined Rubber Valve Cover Gaskets. Fits all 86-95 5.0L/5.8L SBF engines. Perfect for use with AF-6582 series valve covers! Rubber gasket with steel core creates perfect seal and are reusable. Sold as a pair

Trick Flow pushrods, 5/16 in. diameter, 6.250" long. (Stock length for 86-95 5.0L HO Hydraulic Roller Engines) They are formed from 4130 chromoly steel and feature .080 in. wall thickness. These one-piece Trick Flow pushrods are induction-hardened and...

Trick Flow pushrods, 5/16 in. diameter, 6.300" long.  They are formed from 4130 chromoly steel and feature .080 in. wall thickness. These one-piece Trick Flow pushrods are induction-hardened and heat-treated for use with guideplates. Plus, the oil...

Trick Flow pushrods, 5/16 in. diameter, 6.400" long.  They are formed from 4130 chromoly steel and feature .080 in. wall thickness. These one-piece Trick Flow pushrods are induction-hardened and heat-treated for use with guideplates. Plus, the oil...