Intake Manifolds

- Basic operating RPM range: 3500-8000- Intake manifold height: 5.5”- Natural finish- Made from aluminumThis Victor Jr. Intake Manifold features a low profile single-plane design, a cast aluminum construction with a natural finish. This manifold...

Intake Manifold, Victor Jr., Single Plane, Aluminum, Natural, Square Bore, Ford, 351W Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street...

This cast EFI intake elbow allows the use of Ford throttle bodies on any intake manifold w/ the 4150 mounting flange. Slotted mounting holes & dual throttle cable mounting bracket bosses allow the elbow & throttle body to be mounted forward,...

This Edelbrock intake elbow is an ultra high flow (up to 1050 cfm) adapter elbow for throttle body placement on an Edelbrock Super Victor EFI intake manifold.  Will accept up to a 95 mm Ford 86-93 style throttle body.

These aluminum adapters allow the use of a '86-'93 style intake manifold on 1994-95 5.0L Mustangs. Available in Natural Aluminum Silver finish or Black Powdercoat (select above) 75mm opening

Edelbrock's Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley...

Stealth™ Intake Manifold 221, 260, 289, 302 V8 Features: Port Size: 1.83” height 1.02" width Height: Front 4.35", Rear 5.59" High Rise Dual Plane Design Square Carburetor Mounting Flange No EGR provisions Power band: Idle-6000...

Anderson 2018+ Intake Manifold Swap Kit for 2011-2014 Mustang GT Complete kit to correctly install the popular 2018 Mustang GT intake manifold on your gen 1 Coyote Mustang. The 2018 Mustang GT intake manifold is an excellent naturally aspirated...

11-17 Mustang GT for 2018+ Intake Manifold swaps deleting the CMCV/IMRC assemblies. A must for have when swapping 11-14 Mustang GT with 18+ Intake Manifolds. Can be used with 15-17 Mustang GT if deleting the CMCV/IMRC assemblies as well. Easy...

Fel-Pro Performance Intake Gasket composite,Printoseal, 2.10 in. x 1.28 in. Port, .060 in. Thick, Ford, 260/289/302/351W, Set

Fel-Pro Performance Gaskets,Intake,Composite, 2.25 in. x 1.40 in. Port, .090 in. Thick, Ford, 260/289/302/351W, Set

OEM Ford 2018+ Mustang GT Intake Manifold Assembly. (Photo is representation, current part number may be completely black in finish) An excellent performance upgrade for 11-17 Mustang GT's. Gaskets are preinstalled. Has CMCV/IMRC assemblies installed...

FITMENT: 1986-1993 Ford Mustang 5.0LJ&L 3.0 Oil Separator 3oz CapacitySolid billet construction.Limited Lifetime Warranty How does it work? During the process of venting crankcase pressure back through your intake track, large amounts of oil, in...

FITMENT: 1999-2004 Cobra Driver Side 2003-04 MACH I Driver Side J&L 3.0 Oil Separator 3oz CapacitySolid billet construction.OEM Style quick connect PCV fittingsLimited Lifetime Warranty How does it work? During the process of venting crankcase...

FITMENT: 1999-2004 Mustang GT Passenger Side 2001 Bullitt Mustang Passenger Side J&L 3.0 Oil Separator 3oz CapacitySolid billet construction.OEM Style quick connect PCV fittingsLimited Lifetime Warranty How does it work? During the process of...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a 93 Cobra style or GT40 series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a Holley Systemax intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier which...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with a Trick Flow R series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier...

These Trick Flow intake spacers fit all 1986-1995 Mustangs equipped with an Edelbrock RPM II series intake manifold. They are CNC-machined in the USA from premium phenolic material and fit between the upper and lower intakes to create a heat flow barrier...