Anderson Ford Motorsport

Anderson Power By Pass Kit For Passenger Side Mounted Vortech. Fits 86-93 Mustang 5.0L (AF-0106A)

Write a Review
SKU:
AF-0106A
MPN:
AF-0106A
Availability:
Pre-Order
Shipping:
Calculated at Checkout
  • Anderson Power By Pass Kit For Passenger Side Mounted Vortech. Fits 86-93 Mustang 5.0L (AF-0106A)
  • Anderson Power By Pass Kit For Passenger Side Mounted Vortech. Fits 86-93 Mustang 5.0L (AF-0106A)
  • Anderson Power By Pass Kit For Passenger Side Mounted Vortech. Fits 86-93 Mustang 5.0L (AF-0106A)
  • Anderson Power By Pass Kit For Passenger Side Mounted Vortech. Fits 86-93 Mustang 5.0L (AF-0106A)
  • Anderson Power By Pass Kit For Passenger Side Mounted Vortech. Fits 86-93 Mustang 5.0L (AF-0106A)
$640.95
Frequently bought together:

Description

New!

Anderson Power By Pass kit for Passanger side mounted Vortech SI,TI,YS,YSI Trim on 86-93 Mustang 5.0 utilizing a Mondo By-Pass Valve (Pictured but not included)

Dedicated Piping system included with the Anderson Ti and YSi trim supercharger kits.

All aluminum pipe construction
(Vortech Mondo Bypass Valve Not Included)
Flows 1235 cfm at 20,4" of water. Tested on our Super Flow 1200 flow bench

ANDERSON FORD MOTORSPORT designed the POWER BY-PASS KIT because
of the need for a discharge tube that would utilize the VORTECH Mondo Bypass
(which we feel is a must with boost levels of 16 lb or more) on Vortech Superchargers and mass air equipped cars.

While the POWER BY-PASS KIT holds the Mondo Bypass (which is a first) we
went one step further and made it a higher volume discharge tube for the higher
boost levels which will also increase efficiency. We've updated to all polished light weight aluminum to save on weight for hardcore racers where ounces and pounds count.

Polished finished.

Updated multi-ply silicone hoses and bead rolled ends have been added to help secure hoses to pipes for better sealing power.

Included:

- Discharge Tube

- 4" Power Inlet Tube

- Mondo By-Pass Flange Adapter

- Multi-ply Silicone By-Pass Hoses

- Stainless Clamps

- Straight Coupler for MAF

- 90 Degree Inlet Coupler to S/C Head Unit (size select above)

 

*Please select supercharger inlet size above - Inlet Pipe is 4" diameter (select the S/C inlet for proper 90 degree elbow size)

*Note

Does not come with upper discharge pipe couplers. Throttle body size and the supercharger head unit you are running will determine the size of the couplers.

Discharge pipe diameter sizes are as follows:       Supercharger side 3"         Throttle Body side 3.5"

*Fits ProM 80mm/92mm, SCT BA2600/3000 and PMAS 80/90mm mass air meters

*Requires englarging the hole in the fender apron for installation

View AllClose