Supercharger Accessories

Synthetic lubricant for V-3 superchargers. This special fluid is required for proper maintenance of the V-3 supercharger. Use of any other fluid will void the warranty and may cause component failure. Fluid Level Checking ProcedureEnsure that the .06"...

Unlock 50-80HP on your boosted vehicle while decreasing your air temps by up to 150 degrees! The all new Snow Performance Stage 2 Boost Cooler® water-methanol injection system comes fully revamped in 2015 for all boosted (turbocharged/supercharged)...

Vortech supercharger discharge tubes are designed to connect the supercharger head unit to the OEM throttle body. They are manufactured from high-quality aluminum and are available in satin or polished finishes. Complete the installation of your Vortech...

Radiator hose assembly for most passenger side mount 1986-1993 Ford 5.0L Mustang supercharger systems. Use your existing rubber/silicone upper radiator hose.

Features: OPERATING SPECIFICATIONS Spark Energy: 135 mJ per spark Primary Voltage: 535 Volts Secondary Voltage: 45,000 Volts Spark Series Duration: 20 degree Crankshaft Rotation RPM Range: 12,500 RPM with 14.4 Volts Voltage Required: 12-18...

The Vortech Maxflow® Race Bypass Valve flows 320 CFM@8 PSIG and features a compact design that is ideal for sport compacts and other applications with tight engine compartments. These units will retrofit to standard HKS/Greddy style mounting pads and...

Pulley Pack, 2.95 in. Supercharger, 6.88 in. Crankshaft, 8-rib, Ford, Small Block, Kit. Fits 94-95 Mustang GT/Cobra . Uses standard accessory drive.  Comes with belt and hardware.

AEM 35 PSI Boost Dependent Water/Methanol Injection Controller and Wiring HarnessAEM’s Boost Dependent water/methanol injection controller is ideal for vehicles running up to 35 PSI of boost. It has an on-board manifold absolute pressure (MAP)...

  BRAND NEW GENERATION 3 MODEL!!! The AFM MR. FREEZE is simplistic, yet effective.  Being activated by boost and metered by jetting, MR. FREEZE is easily optimized.  Mr. Freeze is an easy bolt-on for all centrifugal superchargers and...

A classic piece that has been re-introduced from Anderson Ford Motorsport. Following a design from Holcomb Motorsports from back in the day Anderson Ford Motorsport has updated and re-introduced the heavy duty Vortech supercharger brace bracket. This...

Anderson Power Pipe® for Procharger F-1, P-Series, D-1SC with A/C on 86-93 Mustang 5.0The Anderson Power Pipe®, with its all 4" mandrel bent Ceramic coated inside and out construction, is the highest flowing inlet pipe available for centrifugal...

Anderson Power Pipe® for Procharger F-1, P-Series, D-1SC without A/C on 86-93 Mustang 5.0The Anderson Power Pipe®, with its  all 4" mandrel bent Ceramic coated inside and out construction, is the highest flowing inlet pipe available for...

Vortech,S,T,YSI Trims, Paxton Novi 2000, Powerdyne Superchargers on 86-93 Mustang 5.0 The Anderson Power Pipe®, with its all Aluminum mandrel bent construction, is the highest flowing inlet pipe available for centrifugal superchargers. We also...

Anderson Ford Motorsport now has what every Vortech owner has always wanted.An easier way to adjust your Supercharger belt. ( For 8 rib pulley )This billet adjuster mounts easily to your Supercharger and allows you to loosen the tensioner bolts and...

Dayco 8-Rib,  53 7/8" Belt

Dayco 8-Rib,  54 5/8" BeltUsed in Anderson Vortech Supercharger Tuner Kits for 89-93 5.0 Mustang Kit with 3.12 pulley Can be used with 2.95 pulley as well.

Dayco 8-Rib, 56 5/8" Belt

Production 2007-2012 Mustang Shelby GT500 intercooler coolant circulation pump Used to circulate water through supercharger intercooler and heat exchanger Inlet and outlet hose connection diameter is 19mm / 3/4" Can be used in many coolant pumping...

10-Rib Pulley Pack with 3.33" Supercharger Pulley and 6.87" Crank Pulley Fits: 1986 - 1993 Vortech equipped Mustangs with 302 based engines Will produce 11-12 psi at 6k rpm with our AFM-Vortech Systems.

Laser cut steel mounting flange with 2" diameter extention tube for mounting the Vortech Mondo Bypass valve.