Supercharger Accessories

Synthetic lubricant for V-3 superchargers. This special fluid is required for proper maintenance of the V-3 supercharger. Use of any other fluid will void the warranty and may cause component failure. Fluid Level Checking ProcedureEnsure that the .06"...

Unlock 50-80HP on your boosted vehicle while decreasing your air temps by up to 150 degrees! The all new Snow Performance Stage 2 Boost Cooler® water-methanol injection system comes fully revamped in 2015 for all boosted (turbocharged/supercharged)...

Unlock 50-70 HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler-running motor! The Snow Performance Stage 2.5 Boost Cooler water...

Features: The 6 BTM is ideal for engines with a turbo or supercharger. Not only will the engine benefit from MSD's full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation.When your turbo or blower...

Features: OPERATING SPECIFICATIONS Spark Energy: 135 mJ per spark Primary Voltage: 535 Volts Secondary Voltage: 45,000 Volts Spark Series Duration: 20 degree Crankshaft Rotation RPM Range: 12,500 RPM with 14.4 Volts Voltage Required: 12-18...

The Vortech Maxflow® Race Bypass Valve flows 320 CFM@8 PSIG and features a compact design that is ideal for sport compacts and other applications with tight engine compartments. These units will retrofit to standard HKS/Greddy style mounting pads and...

Pulley Pack, 2.95 in. Supercharger, 6.88 in. Crankshaft, 8-rib, Ford, Small Block, Kit. Fits 94-95 Mustang GT/Cobra . Uses standard accessory drive.  Comes with belt and hardware.

Vortech T-Rex External Fuel Pump for 94-98 Mustang with stock fuel linesVortech T-Rex and intank AF-255HP wil flow with stock fuel lines 51 GPH at 60psi. That will handle up to 42lb injectors

AEM 35 PSI Boost Dependent Water/Methanol Injection Controller and Wiring HarnessAEM’s Boost Dependent water/methanol injection controller is ideal for vehicles running up to 35 PSI of boost. It has an on-board manifold absolute pressure (MAP)...

  BRAND NEW GENERATION 3 MODEL!!! The AFM MR. FREEZE is simplistic, yet effective.  Being activated by boost and metered by jetting, MR. FREEZE is easily optimized.  Mr. Freeze is an easy bolt-on for all centrifugal superchargers and...

Anderson Ford Motorsport now has what every Vortech owner has always wanted.An easier way to adjust your Supercharger belt. ( For 8 rib pulley )This billet adjuster mounts easily to your Supercharger and allows you to loosen the tensioner bolts and...

Dayco 8-Rib,  53 7/8" Belt

Dayco 8-Rib,  54 5/8" BeltUsed in Anderson Vortech Supercharger Tuner Kits for 89-93 5.0 Mustang Kit with 3.12 pulley Can be used with 2.95 pulley as well.

Dayco 8-Rib, 56 5/8" Belt

Laser cut steel mounting flange with 2" diameter extention tube for mounting the Vortech Mondo Bypass valve. 

Vibrant Performance Aramid Reinforced Silicone Straight Hose Couplers feature a 4-ply Aramid reinforcement fabric between each layer of silicone which allows for an impressive operating temperature range of -75° F to 392° F (-60° C to...

Vortech 8-Rib Supercharger Pulleys are machined from 6061 T-6, hard anodized aluminum with the proper profile to maximize surface contact area for precise fit. Each pulley is built to SAE standards.

Vortech 8-Rib, 2.95" Pulley

Vortech 8-Rib, 3.12" Pulley

Vortech 8-Rib, 3.47" Pulley