98794T Ram Powergrip Clutch Kit, 10.5" - 26 Spline

If you are regularly running drag radials on your Mustang, regardless of power level, the RAM Powergrip is for you. It is a "dual-friction" type clutch and features the 300 series organic facing on the pressure plate side of the disc and the 900 series friction material on the flywheel side of the disc. It offers up to a 500 rear wheel horsepower handling capability without breaking your leg with an overly hard pedal. The 300 series friction material is a premium organic lining that is bonded to a steel backing that allows for the highest rotational strength available along with better heat dissipation. The 900 series friction material is comprised of a sintered iron construction and offers a high coefficient of friction while still allowing for some slip for the clutch to engage smoothly. Some chatter may be evident in street driving. Each Mustang Clutch Kit includes a higher clamp load pressure plate, 300/900 Series friction disc, Release Bearing, and an alignment tool. The 1986-1995 TKO option features a 26-spline hub compatible with the input shaft of the Tremec TKO series transmissions. The use of a billet steel flywheel is required with these clutch kits. Use of an aluminum quadrant with an adjustable clutch cable is required with these clutch kits.

• Increased clamp load pressure
• Good Street Manners
• 26 Spline Clutch Disc
• 900/300 Series Combination Clutch Disc
• Includes throw out bearing & alignment tool