Anderson Ford Motorsport
Anderson-Vortech Stage I Si-Trim Supercharger Kit. Fits 94-95 5.0L Mustang
- SKU:
- KITSTG1-SQ95
- Shipping:
- $19.99 (Fixed Shipping Cost)
Description
Anderson / Vortech Stage I Si-Trim Supercharger Kit for 94-95 Mustang 5.0
Includes:
3.12 Upper Pulley, 6.87 Lower Pulley (12lb-15lb @ 6000 rpm)
AFM Power Pipe ®
All mandrel bent construction, is the highest flowing inlet pipe available for centrifugal superchargers. It also puts the mass air in the inner fenderwell for a cooler intake charge.
(Injectors and MAF not included) Recommended part # AF-INJ42 or HLY-522-428 and PM-80PP-M95-42 (For Cobra models PM-80PP-SVT95-42)
FMU for 38-42lb injectors
Anderson 255 ltr In-Tank Fuel Pump
All Required Mounting Hardware from Vortech
MSD 6BTM Ignition
Stock engines will see approx. 350-380 wheel horsepower, mild heads and cam will see 400-425 wheel horsepower. We do not recommend exceeding 450 wheel horsepower with this kit or installing on a highly modified engine where custom tuning would be better suited.
Not CARB approved. For "OFF ROAD" use only.
Installation note*
If installing on a 94-95 Cobra there will be a few differences in the install process. The factory oil cooler you can keep or remove, however if you do keep you will need to pick up some flexible heater hose and reroute the cooler lines along with removing the metal coolant tube to install.
For all 94-95 vehicles you will need to vent the crankcase pressure to avoid blowing out seals on your engine. The easiest way will be to put a breather cap on your passenger side valve cover. Part number AF-26-1522 is what you will need.