Anderson Ford Motorsport

B-61 Camshaft.  Requires aftermarket pistons and 1.6 roller rockers. Hydraulic Roller. Steel Core. Use steel camshaft gear.RPM range 3000-7200N2O or S/C 15-25lb 363-427 c.i.d. Best performer for...

Bosch 4.9 Wideband O2 Sensor Replacement Bosch Wideband Oxygen sensor for Sniper EFI and Terminator X and X Max systems. Original equipment for AFM Gen 2/3 Holley kits. Anti-Seize pre-applied...

As seen on Brew2l Vlogs YouTube channel A Brew2l - AFM Special! For carburated guys looking for timing control and electronic specialty accessory controls at a reasonable price, this kit is for you!...

N-111 Camshaft.  Requires aftermarket pistons and 1.6 roller rockers. Hydraulic Roller. Steel Core. Use steel camshaft gear.RPM range 2900-7100347-408 c.i.d. Best performer for 347 cu. in., 1.6...

N-112 Camshaft.  Requires aftermarket pistons and 1.6 roller rockers. Hydraulic Roller. Steel Core. Use steel camshaft gear.RPM range 3000-7500347-408 c.i.d. Best performance for 360+ c.i. &...

N-113 Camshaft.  Requires aftermarket pistons and 1.6 roller rockers.   RPM range 3400-7700. Hydraulic Roller. Steel Core. Use steel camshaft gear.347-408 c.i.d. Best performance for...

Anderson N-22 Two valve Camshaft for PI Heads & OEM stock pistonsRPM range 2400-62004.6 Best performance up to 6200 rpm. Nice idle, good driveability down to 1800 rpm, performance range...

Anderson N-32 Two valve Camshafts for PI Heads with AFM Valve SpringsRPM range 2700-6600. Good with Typhoon & Track Heat intakes4.6 Best performance up to 6600 rpm shift point. Lumpy idle, good...

N-41 Camshaft works with stock OEM pistons with 1.6 roller rockers.  RPM range 2600-6200. Hydraulic Roller. Steel Core. Use steel camshaft gear.302 c.i.d. This cam is to be used with 1.6 R...

N-412 Camshaft works with stock OEM pistons with 1.6 roller rockers.  RPM range 2300-6200. Hydraulic Roller. Steel Core. Use steel camshaft gear.302 c.i.d. This cam is to be used with 1.6 R.R...

N-51HR Camshaft works with stock OEM pistons with 1.6 roller rockers.  Piston-to-valve clearance must be checked.  RPM range 2600-6500. Hydraulic Roller. Steel Core. Use steel camshaft gear...

Anderson N-52 Two valve Camshafts for PI Heads with AFM Valve Springs & aftermarket pistons/valve reliefsRpm range 3500-7200. Best with Typhoon & Track Heat intakes 4.6 Best performance up to...