On3 Performance Premium "Street" Fox Body 351w Swap Single Turbo Tuner Kit

Anderson Ford Motorsport is now a dealer for On3 Performance Turbo systems! Over the years we have personally used these systems on our own vehicles and have come up with a more "premium" kit that gives you the added items that make the system more complete. This kit is specifically for 351w swapped Fox Body Mustangs. This kit allows you to take the guess work out of what else you would need to get a more complete installation as well as saving money over retail! Our "Street" series turbo kits from On3 performance will give you an upgraded turbo that can do between 10-20lbs of boost reliably on the street. Power ranges between 450-800 rwhp with the right engine upgrades. These "Street" kits will also give you the proper amount of accessories for adjustability and reliabiliy to protect your ignition and engine bay components from the added heat from a turbocharger system. 

Key features for our "Street" series On3 Turbo kits:

• Ceramic Coated Hotside pipes 
• Fits 351w/5.8L Fox Body swaps only
• 90 degree oil filter adapter kit allowing to use a full size engine oil filter
• 10an stainless steel oil drain kit with fittings
• 76mm ceramic ball bearing turbocharger (On3 brand)
• Turbosmart Wastegate
• Turbosmart boost controller tee
• Downpipe wrap (black)
• T3/T4 style turbo blanket (black)
• Spark plug wire boots (black)
• Remflex Header Gaskets (3028)
• Stainless wrap ties (qty 8)

These kits are "tuner" systems meaning there is no tuning, fuel or maf components included. No air filter is included.

This kit starts as a standard On3 single turbo kit including there alternator bracket, blow off valve, downpipe, intercooler and intercooler piping which is all included. A standard 3" street intercooler comes standard in our package. All mounting hardware, clamps and couplers are also included. 

Note*

Bumper trimming may be required. Intercooler mounting brackets will need to be made by the installer (not included). Power steering cooler lines may need to be relocated for proper intercooler fitment.

Depending on how your intercooler mounts some modifcation/cutting may be necessary for the included intercooler piping. 

Even though we try and make these kits as "complete" as possible there may be additional items needed for installation. Most of these items will be easy to source from local parts stores. 

If you are still running mass air you will need to cut the intercooler pipes shorter on the passenger side to add in a blow-thru style MAF housing. 

Custom tuning is required.

A custom exhaust will need to be made to connect to included downpipe. (No Y-pipe included)

Shipping Note*

These kits with the options we have built may take additional time for shipment. Expect shipping to be 4-6 weeks from time of order. Possibly sooner.