Anderson Level 1 Fuel System 86-95 Mustang 5.0L/5.8L

A complete modular fuel system component kit for 86-95 Mustang 5.0/5.8L

Now comes with Anderson Fuel Rail Kit! (AF-1001)

This utilizes the factory fuel tank with in-tank fuel pump module. This kit offers high quality components from some of the best manufacturers in the world.

Designed to work with pushrod 5.0L Mustangs or 351W/5.8L swapped Mustangs. Can be used for Naturally aspirated or Forced Induction utilizing pump gas.

This kit is not designed for use with E85.

Level 1 Kit can handle 600+ RWHP with forced induction on pump gas

(HP level may vary based on fuel injector size and fuel type being used)

Kit Components: *UPDATED with ORB swivel fittings for the fuel rail ports!

• 340 LPH Fuel Pump Hanger Assembly (optional 525 lph pump available, select above)
  
• Anderson Fuel Rail Kit for 86-95 Mustang 5.0L (NEW! Clears TFI style distributor w/o spacers using included 45 degree adapter fitting)
  
• Fuel Pressure Regulator with fittings and gauge
• 10 Micron Fuel Filter with bracket and fittings
• 40 ft of -6AN Braided Stainless Steel PTFE Fuel Line
• Fuel Pump Heavy Duty Wiring Relay Kit
• -6AN PTFE straight fittings (x10)
• -6AN 90 degree fittings (x1)
• -6AN to -6AN ORB 90 degree module fittings (x2)
• -8AN to -6AN 45 degree ORB rail adapter (x2) - for front fuel rail ports
  
• -8AN to -6AN 90 degree ORB rail adapter (x2) - for rear fuel rail ports
• Fuel line insulated mounting straps (x10 - hardware not included)

Basic knowledge of fuel systems is recommended. You will need to cut to length your fuel lines as the fitting ends are not preassembled onto the fuel lines. (we do NOT recommend high speed cutting tools when cutting the fuel lines to length, using hose shears for cutting is recommended) Part number 2989 hose cutting shears available here.

*The included diagram will give you a basic understanding on how/where to route your fuel lines. This is subjective to the installer.

Mounting strap hardware is not included, this is subjective to the installer whether it be self tapping screws or rivets.

Manufacturer components include: Fore Innovations, Anderson Ford Motorsport, Aeromotive, and Holley