B-31 Camshaft 2400-6200 Range

B-31 Camshaft works with stock OEM pistons with 1.6 roller rockers.  RPM range 2400-6200. Hydraulic Roller. Steel Core. Use steel camshaft gear.

N2O or S/C 8-15 lb 302 c.i.d. Best performer for 1.6 R.R., stock pistons and 6200 rpm. Great with TFS, AFR Enforcer/Renegade or Edelbrock heads. Minimum 30lb injectors and 80mm mass air. Recommend 3.55 or 3.73 gears. Good drivability down to 1900 rpm, mild idle, rpm range 2400-6200, works good with 89-95 EEC, needs 2600-3000 converter. Great N.A. cam for 94-95 Mustang with great drivability.

Note* Will NOT fit stock pistons on a 1986 5.0L without valve reliefs in the pistons

Fits the following cylinder heads with stock OEM pistons from 87-95 5.0L

AFR-1399 Air Flow Research Renegade 165cc with 1.9 valves

AFR-1341 Air Flow Reasearch Enforcer 185cc with 1.9 valves

TFS-51410002-M61 TrickFlow 170cc Twisted Wedge with 2.02 valves

TrickFlow 170cc 11R with 2.02 valves

ED-60225 Edelbrock Performer RPM 170cc with 1.9 valves

GT40 Iron with stock size valves

GT40P Iron with stock size valves

GT40 3 Bar Iron with stock size valves

OEM E7 Iron with stock size valves

 Example of using Anderson B-31 cam
Vortech S-Trim, Anderson Power Pipe, 347 c.i., AFR 185 Heads, Anderson B-31 camshaft, Edelbrock Performer RPM intake,PMS,  Anderson 1 3/4 shorty headers, Bassani X-Pipe and Bassani exhaust

Example of using Anderson B-31 cam
Anderson Ford Motorsport  Stage II S-Trim, Stock short block, TFS Heads,HOLLEY SYSTEMAX intake 42# Injectors,75mm T/B, Pro-M 80MM,,AFM B31 camshaft,1.6Roller Rocker , BBK 1.625"Header,BBK off road ,Flowmaster 3 Chamber Cat Back

Example of using Anderson B-31 cam with stock 94-95 ECC
1995 Mustang GT, TFS T.W. heads,Systemax II intake,75mm T.B.,Pro-M 75mm,30# injectors,Hyfire 6a,B-31 camshaft,1.625" uneq shorty hdrs,x pipe,Magnaflow cat back, street underdrives,3.73,pms, 93 oct fuel.